Connect the hardware
Check whether your iPhone uses Lightning or USB-C. Remove a very thick case if needed, then insert the matching connector fully.
01 / GET STARTED
Three steps
Keep the iPhone unlocked and go in order. No computer and no jailbreak required.
Connect in the app
Open the HHJ Pro app, find the hardware in the device list, and wait until it shows connected.
Choose a location
Tap a point on the map or enter latitude and longitude. Set altitude if you need it, then reopen the app you care about.
02 / RESTORE LOCATION
Done for now?
Unplugging usually restores the real location. If it doesn’t, use these steps.
- 01
Unplug HHJ Pro
Remove the hardware from the bottom of the iPhone.
- 02
Close the related apps
Fully close HHJ Pro and the app you were using from the app switcher.
- 03
Refresh Location Services
Open Settings → Privacy & Security → Location Services. Turn it off, then on again.
- 04
Check in Maps
Reopen Maps. If it’s still wrong, restart the iPhone once.
03 / TROUBLESHOOTING
No response? Check these first.
Most issues come from a loose plug, a thick case, or an app that wasn’t fully reopened.
The app can’t find the hardware
Unplug and plug back in while the iPhone is unlocked. Remove a thick case, fully close HHJ Pro, then reopen it. Restart the iPhone if it still doesn’t appear.
The location didn’t change
Confirm the app shows the hardware as connected. Fully close the target app, set the location again, then reopen the target app.
The location snaps back after a while
Keep the hardware plugged in. Confirm HHJ Pro still shows connected, then close and reopen the target app.
My real location didn’t come back
Follow the restore steps above. If refreshing Location Services doesn’t help, restart the iPhone once.
I’m not sure my model works
Send your iPhone model and iOS version to Telegram HASHCLOUD8 before ordering.